How I made this card. This card is 3 layers. I glued 2 pieces of paper back to back with spray adhesive. (note: you can skip this step if you have double sided paper.) Then I cut them on my Cricut. After I cut them I flipped the large triangle backward and then folded the large triangle under the small triange. When you do that the back side get flipped up and you can then see the design from that side. After I was done I turned my card over face down and sprayed the backside with spray adhesive and then layed a 3rd sheet of paper face down on the back side of the card giving the front of the card a background color inbetween the triangles.
NOTE: When using spray adhesive hold your paper in a large trash can or bucket so the spray will not get all over everything. Also you can use a clothes pen to hold the paper on the very edge instead of holding it with your fingers so you won't get the glue on you.
CLICK HERE to get this file in my Volume 1 set of svg files...ENJOY!!
If you want just the cuts you will need to go to Penny's website....ENJOY!!